Turn your computer into a digital forensic workstation with Forensic LabDock. Installed in a standard 5.25" bay, Forensic LabDock gives convenient, forensic access to suspect hard drives. Write-blocking is done in hardware, with proven WiebeTech write-blocking technology.
Write-blocked access to thumb drives is just as convenient as write-blocked SATA and IDE. Forensic LabDock also incorporates a USB WriteBlocker, so you can forensically access flash drives or full size USB enclosures. Most USB 1.1 and 2.0 devices that normally register with the computer as a "USB Mass Storage Device" are supported.
Built-in HPA/DCO Detection
Do you know what could be lurking in the hidden areas of a hard drive? HPA (Host Protected Areas) or DCO (Device Configuration Overlays) can exist on hard drives, which are not accessible by your Operating system.
Further, these areas can be used to hide information from you. Forensic LabDock will alert you if these areas exist, so you can inspect them. Forensic LabDock comes with software to let you choose how to handle a hidden area. It allows you to:
Detect and do nothing
Detect and temporarily remove HPA
Detect and permanently remove HPA
Detect and permanently remove HPA and DCO
Extend Support for other drive types
Need to access a non-standard hard drive? Use WiebeTech's Combo Adapters to access 1.8" drives, notebook drives, drives found in iPods, and more. Combo Adapters work with many of our docking products, including Forensic LabDock.
Protects drive's contents by preventing disk writes. Uses industry-proven WiebeTech write-block technology to provide access to USB Mass Storage devices (such as thumb drives), IDE/PATA and SATA hard drives.
Fits in standard 5.25" bays, including cases with confining bezels, such as Dell Optiplex and Precision mini towers. Access from the front of the workstation means no reaching behind your computer, fishing for cables.
Keeps suspect drives more safe during examination
Shorter cables and a dedicated out-of-the-way bay keeps your work area less cluttered and provides a safer environment for your drive.
eSATA or FireWire
Optionally connected internally with FireWire or eSATA. USB Write-Blocking requires internal USB port.
Capture data at the drive's full speed when connecting over eSATA ( internal host connection). USB write-blocking operates 20%-25% faster than the competing USB write-blocking product
An LED blinks when it detects a hidden partition.
Disk Drive Power Out
Allows powering of hard drive from a standard molex power cable.
Draws air over the suspect drive while in bay, keeping it cool.
DC Power Input LED
Identifies valid power input source on DC input jack.
Disk Drive Power In LED
Identifies valid power input source on 4-pin drive power Identifies valid power input source on 4-pin drive power input socket.
Identifies write protection technology is operational.
+5V, +12V LEDs
Verifies that power output is operational.
On / Off Switch
Allows Power Up / Down.
FireWire Host Detection LED
Identifies valid FireWire host attachment.
USB Host Detection LED
Identifies USB attachment.
IDE Cable Connector
Supports attachment to drives inside of computers.
SATA Cable Connector
Connect 2.5" or 3.5" SATA drives.
LabDock LDs: 5.25in bay form factor; front panel read/write access to SATA & PATA drives; SATA host connection.